Notifications
Clear all
Hello all,
I’m looking for a replacement rear LCA outer bushing. It seems the knuckle contains two bushings, one for the LCA and one for the trailing arm. SuperPro offers a full set of rear trailing arm bushings, for both the inner arm and outer knuckle. However, for the LCA, there’s only inner bushings.
Any advice on a replacement bushing, poly or otherwise, for the outer rear LCA?
2000 Toyota MR2 Spyder, 2021 Lexus UX 250h F Sport
Topic starter
Posted : 31/10/2021 11:03 pm
That bushing is actually a spherical bearing, and you don’t want to try to replace it with a rubber or poly bushing. Twos r us has a solution, or you can use the Celica part with a 14mm bolt replacing the 12mm Spyder bolt. Read all about it in Spyderchat.
Posted : 02/11/2021 8:26 pm
1