I am about to start the SMT to manual conversion shortly. I have the BGB, and the instructions from Monkey Wrench. What I could use is a few pictures of the connection points at the transmission area and clutch slave cylinder. The various brackets and the actuator link, for example, are shown, but in blown-up form only. Some pictures would be worth ”a thousand words”. Thanks for any pictorial assistance.
This topic was modified 5 years ago by Murray
Topic starter
Posted : January 7, 2020 2:32 pm
Im currently helping a member with a transmission repair. The transmission is now in the car but the top end needs to be put back together. I should have some picture for you soon.
Posted : January 8, 2020 9:35 am
Thanks, Dev. That will be very helpful.
Topic starter
Posted : January 8, 2020 10:21 am